Oil should contain less water than 200 mg/kg (0,02%, 200 ppm), to protect machines and oil systems against corrosion and cavitation damage. For oils with water content (even above 20%), the KLEENTEK Corp., Japan has developed a different series for separating water – Dehydrators (DH), which are able to reduce water content to a safe level, without limiting the machine operation. DH devices are used to separate free and bound water, as well as cutting fluids. DH devices can be used separately before cleaning, in series with the EOC device or as a compact, installed DH + ELC.

KLEENTEK: Electrostatic Oil Cleaner (“EOC”) make use of the principle of Coulomb’s Law. Oil flows around multiple pairs of electrodes with potential difference. suitably shaped inserts – collectors – are placed between the electrodes, where the particles are captured by the principle of electrostatic forces. The collectors are easily replaceable, affordable and sustainable. It can remove solid contaminant up to a few kilograms ("kg").

KLEENTEK: Electrostatic Oil Cleaner (“EOC”) could remove insoluble solid contaminant, varnish and oil oxidation products from hydraulic and lubricating oil from up to 0.03 micron onward. It removes varnish, oil oxidation product and insoluble solid contaminant without causing spark discharge in the hydraulic lubrication system.

The use of electrostatic oil cleaning on hydraulic and lubricating oil do not remove additives that has been blended and added into oil-by-oil manufacturer. However, with the prolong usage of KLEENTEK: Electrostatic Oil Cleaner, the depletion of oil additive is expected for most of the scenario. And therefore oil top-up is recommended and preferred of the same brand and and model.

Unless it is necessary to supplement the loss caused by oil spills, in many cases oil change is not required. Additives remaining in oil are not eliminated so quickly, when maintaining high oil cleanliness. It is just sufficient to perform oil analyzes and know their running status. Experts have found out that preserving mechanical and lubricating oil qualities depends on regular separation of foreign substances. Most EOC users do not change oil and their machines work seamlessly.

In the process of oxidation (and thermooxidation), acidic products are formed, which determine formation of other compounds. Sediments (even resins) are formed, causing aggravated operation or even seizure of hydraulic components, reducing life of sealing (“sandpaper effect“).

All of our customers has been advised that the current lead time for both KLEENTEK: Filter Element, Cartridge Collectors and other replacement parts is around 2-4 weeks. However this is subjected to changes without notices and notification. Our customer has been reminded to always check with your local/regional authorized agent for a more accurate delivery on your shipment.

Thank you for expressing your keen interests in KLEENTEK: Electrostatic Oil Cleaners and its associated product. All of our customer is encourage to access all of the information as included in the link below: https://drive.google.com/drive/folders/1m-v34HYYxPIABq1pyJdeQyZo4s_sbelD?usp=sharing

Regular oil analysis is recommended to ensure optimal lubricant performance and evaluation within your hydraulic system. Customer is encourage to refer to the following documentation for more information on instruction on the purpose way to send oil sample for our in-house analysis. https://drive.google.com/file/d/1paLVwgAGVykm_83FZ36m4vZ5aif1H_ce/view?usp=share_link

All of our customer has been advise that the current lead time for all KLEENTEK: Electrostatic Oil Cleaner (EOC); KLEENTEK: Electrostatic Oil Cleaner with Dehydration Unit (EDH) and other associated machine is currently between 2 to 2.5 months. However this is subjected to changes without notices and notification. All of our customers has been reminded to always check with your local/regional authorized agent for more information concerning your delivery.

All of our customers has been advised that the current lead time for both KLEENTEK: Filter Element, Cartridge Collectors and other Replacement Parts is around 2-4 weeks, depending on our stock inventory. However this is subjected to changes without notices and notification. Please always check with your local/regional authorized agent for a more accurate delivery on your shipment.

Thank you for expressing your keen interests in KLEENTEK: Electrostatic Oil Cleaners and its associated product. You're encouraged to complete your enquiry using the button below: and our sales representative will get in touch with you shortly.

All of our customer has been advise that the current lead time for all KLEENTEK: Electrostatic Oil Cleaner (EOC); KLEENTEK: Electrostatic Oil Cleaner with Dehydration Unit (EDH) and other associated machine is currently between 3 to 3.5 months. However this is subjected to changes with notices and notification. Please always check with your local/regional authorized agent for more information concerning your equipment delivery.

We're open for business: Monday - Friday, 0900 to 1800 Saturday, 0900 - 1300 close on all major public holiday, except for engineering emergencies prior appointment before any face-to-face engagement is always preferred and recommended. virtual meeting via Zoom, Google Meet and Microsoft Team is always preferred and recommended for any theoretical discussion.

Our office is located at the following address: c/o: Focus Machinery Pte Ltd, Singapore The Workshop @ AMK Block 5008, Ang Mo Kio Ave 5, #04-09, Techplace II Singapore 569874 Please be reminded that you're required to register yourself with the community team by providing the following information: Full Name: Email Address: Contact No.: